home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Magnum One
/
Magnum One (Mid-American Digital) (Disc Manufacturing).iso
/
d7
/
bexe_240.arc
/
ENGLISH.TXT
< prev
next >
Wrap
Text File
|
1990-07-13
|
14KB
|
416 lines
;--------------------------------------------------------------------------;
; ;
; ;
; ------------ Bit-Bucket Software, Co. ;
; \ 10001101 / Writers and Distributors of ;
; \ 011110 / Freely Available<tm> Software. ;
; \ 1011 / ;
; ------ ;
; ;
; (C) Copyright 1987-90, Bit Bucket Software Co., a Delaware Corporation. ;
; ;
; ;
; ENGLISH language text for BinkleyTerm 2.40 ;
; ;
; ;
; For complete details of the licensing restrictions, please refer ;
; to the License agreement, which is published in its entirety in ;
; the MAKEFILE and BT.C, and also contained in the file LICENSE.240. ;
; ;
; USE OF THIS FILE IS SUBJECT TO THE RESTRICTIONS CONTAINED IN THE ;
; BINKLEYTERM LICENSING AGREEMENT. IF YOU DO NOT FIND THE TEXT OF ;
; THIS AGREEMENT IN ANY OF THE AFOREMENTIONED FILES, OR IF YOU DO ;
; NOT HAVE THESE FILES, YOU SHOULD IMMEDIATELY CONTACT BIT BUCKET ;
; SOFTWARE CO. AT ONE OF THE ADDRESSES LISTED BELOW. IN NO EVENT ;
; SHOULD YOU PROCEED TO USE THIS FILE WITHOUT HAVING ACCEPTED THE ;
; TERMS OF THE BINKLEYTERM LICENSING AGREEMENT, OR SUCH OTHER ;
; AGREEMENT AS YOU ARE ABLE TO REACH WITH BIT BUCKET SOFTWARE, CO. ;
; ;
; ;
; You can contact Bit Bucket Software Co. at any one of the following ;
; addresses: ;
; ;
; Bit Bucket Software Co. FidoNet 1:104/501, 1:132/491, 1:141/491 ;
; P.O. Box 460398 AlterNet 7:491/0 ;
; Aurora, CO 80046 BBS-Net 86:2030/1 ;
; Internet f491.n132.z1.fidonet.org ;
; ;
; Please feel free to contact us at any time to share your comments about ;
; our software and/or licensing policies. ;
;--------------------------------------------------------------------------;
;
; We really should tell you what these all correspond to, but since
; release is imminent, we don't have the time. In general, if there
; is a single trailing space, it is significant. If there are
; multiple trailing spaces, then that field can be no longer than the
; current line length.
;
; All lines starting with ';' are comments
; Comments may be put on any individual line using ';' as leftmost character
;
; Compiler converts '\n' and '\r' for you.
;
; The following line contains the record count and version number
; Record count should be one greater than X_TOTAL_MSGS in MSG.H !!
347 1
;
; Start of message text below
;
:Dialing %s with script '%s'
!Could not open script %s
+Master script timer expired
+Script '%s' failed at line %d
!Revision 3 FOSSIL does not support BREAK signal
!Too many labels in script
Macro number
is out of range 1-9
Shell number
Illegal zone: %s\n
Requests Allowed
LogLevel must be 1-5 - %s is unknown\n
Ridiculous MAXport value: %s\n
Illegal port: %s\n
Illegal CARRIER mask: %s\n
key
call
Unknown or illegal config line: %s\n
Directory '%s' does not exist!\n
BinkleyTerm may fail to execute properly because of this!\n
\rPress <Escape> to enter BBS.\r
\r\rProcessing Mail. Please hang up.\r\r
+Nothing to send to %s
!Connection attempt aborted
#Modem hang up sequence
:No outgoing file requests
:Outbound file requests
:End of outbound file requests
*File Requests declined
\r\r* Address %s Using %s\r\n
Intro:
*Remote didn't respond
*Lost Carrier
*Password-protected session
!Password Error from %s: His='%s' Ours='%s'
!Called %s and got %s
:WaZOO method:
*End of WaZOO Session
Sending Mail Packet
Open
Keyboard Escape
File %s truncated
+Dupe file renamed: %s
Open Character Device
Too many errors
File %s deleted
Transfer cancelled
!Couldn't open CTL file: %s
Darn! The FOSSIL seems to have gone away! Exiting
Cannot re-open logfile
FOSSIL: %Fs
FOSSIL: Revision Level 3 Assumed
:Starting Event %d
#Exit at start of event with errorlevel %d
#Running clean/pack sequence
#System re-enabled after clean/pack sequence
!Date rollover problem?
:Exiting to BBS with Errorlevel %u
:Spawning BBS
:Returned from BBS
:Exiting to external mailer with Errorlevel %u
#Setting baud to %u
*Remote Uses
Version
Program
*Sending mail using FTS-0001 compatible fallback
*Refusing inbound file requests
!Tired of waiting for other end.
*End of FTS-0001 compatible session
*Receiving mail using FTS-0001 compatible fallback
*Giving mail to %s
*Node %s refused to pickup mail
!Memory overflow error
Outbound
File Attaches
*Making file request
End of
*Receiving inbound mail
*Pickup is turned off - refusing mail.
Inbound
Mail Packet
!Password Error assumed
!Mail Packet '%s' cannot be renamed
!Mail Packet renamed to '%s'
Can't find protocol module:
Duplicate protocol name:
*Processing node %s -- %s
!Couldn't find Address: %s
!Disconnecting nuisance caller
!No BOSS in the nodelist
!Unable to open %s
!Unable to allocate memory for Nodelist Index
!Failed to read nodelist index into memory
!Unable to position to node record in %s
!Not able to read node record from %s
File Requests
:%d matching files sent
!Bad Bark Request Data - streaming garbage
!Bad crc - trying again
!System misconfigured or no entry in Nodelist
Event %d - Waiting
:Incoming call, dial aborted
Dynamic Event
:Exit requested from keyboard
:Function key exit - errorlevel %d
Disabling Modem
:Invoking Message Reader
:Message Reader returned to BinkleyTerm
Enabling Modem
!No Message Reader to invoke
!Could not do GET
!Could not do KILL
:Entering POLL Mode
:Poll completed
!Could not do SEND
:Keyboard request to enter terminal mode
:Polling Boss Node
:Executing keyboard shell %d
:Returning from keyboard shell
!No keyboard shell %d
Junk character from keyboard - continuing
:Shelling to Command Interpreter
\r\nType EXIT to return to BinkleyTerm\r\n
:BinkleyTerm Reactivated
!Calls not permitted during this event.
Immediate call requested
\rPlease enter a net/node number:
Currently Polling Node
Init
Waiting
Dialing
HangUp
Connect
:Dialing %s
Ending time wraps through midnight - not allowed\n
'%s' has an invalid START-TIME\n
'%s' has an invalid END-TIME\n
'%s' has bad AvgWait (higher than max of 1800 or less than min of 0)\n
'%s' has a bad Errorlevel code\n
'%s' has a bad number of Tries\n
'%s' has something indecipherable\n
'%s' has an invalid DAY field\n
Nothing in Outbound Area
Node Status
!Insufficient data for session
+End of connection attempt
!Still have mail for %s
:Exit after compressed mail with errorlevel %d
:Exit after file extension '%s' with errorlevel %d
:Exit after receiving mail with errorlevel %d
:Received mail, running 'AfterMail' program
#Re-enabling system following 'AfterMail' program
Setting
to initial speed of
baud. Press Alt-F10 for HELP.\r\n
Multi-Tasker:
Current Settings
Today at a Glance
Pending Outbound Mail
Initializing System
Recent Activity
Transfer Status
Event:
Port:
Status: Init
BBS/Mail:
Calls Out:
Good/Cost:
Files I/O:
Last:
Press Alt-F10 For Help
Node: %s
!Password override for outgoing call
\r**Zmodem Autodownload initiated\r\n
\r**Zmodem Autodownload finished\r\n
\r\nBinkleyTerm now communicating at
\r\nPlease enter a phone (or net/node) number:
\r\nUnable to force carrier drop by dropping DTR!\r\n
\r\nWelcome back!\r\n
\r\nLog file name:
\r\nBinkleyTerm now in MAILER mode\r\n
BinkleyTerm now in MANUAL mode\r\n
\r\nBinkleyTerm now using COM
\r\nBinkleyTerm is ready to SEND a file...\r\n
Which Protocol do you want BinkleyTerm to use?\r\n
\r\nBinkleyTerm is ready to RECEIVE a file...\r\n
\r\nSending BREAK signal\r\n
Done\r\n
\r\nYou are using
Sorry. I don't know that protocol, returning to terminal mode.\r\n
Filename to SEND:
OK....Choose!
Filename to GET:
\r\nLogfile %s closed.\r\n
\r\nCould not open logfile %s\r\n
\r\nLogfile %s open.\r\n
:Connection terminated
Switching back to
Polling:
GET a File
Address to GET from:
Password to use:
Are you sure (Y/N)?
Yes
No
SEND a File
Address to SEND to:
KILL outbound mail
Address to KILL:
Kill ALL mail?
drats
No Send - Remote Hung Up
+Corrected %d errors in %ld blocks
+Sent
+Remote Synchronizing to Offset %ld
!Temporary receive file '%s' could not be opened
+Already have %s
+Synchronizing to End of File
+Synchronizing to Offset %ld
+Received
!Original name of %s could not be used
!EOT not expected until block %ld
*Remote System
UNKNOWN - FTS-0001 Mailer
System Initializing. Please wait...\n
\r\nUnrecognized option: %s\r\n
\r\nThanks for using %s,\r\n
Another fine User-DEVELOPED software package!\r\n
+Remote refused %s
!Error
Can't
+CPS: %lu (%lu bytes) Efficiency: %lu%%
Compressed Mail
Net File
Elapsed
Trouble?
Resending from %s
Send %ld blks of %s (%ld bytes)
Update
File
Request
:Executing
!Carrier lost, request(s) aborted
!File Request limit exceeded
!Event Overrun - requests aborted
No AVAIL list
No ABOUT file
!OKFILE Error `%s'
!Request password error: '%s' '%s' '%s'
Rcv %ld blks of %s from %s (%ld bytes)
Timeout
Checksum
CRC
Junk Block
on block
Find
Read
Seek
Short Block
Close
Unlink
Write
SKIP command received
F1 ... F10 = input phone number, (ENTER) = start, (ESC) = abort\r\n
ALT-Fn = load saved set (n), Shift-Fn = save into set (n)\r\n
User set last loaded/saved: %d\r\n
Phone Numbers currently Selected:\r\n\r\n
\r\nInput Command:
Element Chosen = %2d\r\n
Currently contains %s\r\n
(ENTER) = save, (space)(ENTER) = delete, or enter new number:\r\n
(ENTER) or (space)(ENTER) = cancel, or enter new number:\r\n
Error reading data from set %d\r\n
Error closing file for set %d\r\n
Set %d successfully loaded.\r\n
Error writing data to set %d\r\n
Current list of numbers saved to set %d\r\n
Press ENTER to continue...
#Starting Phone List Scan
#Connected to list element %d
Debris
Long pkt
!Ignoring `%s'
!Out of disk space
Receiving
!Zmodem Init Problem %s
bad position
!Zmodem Recv Problem %s
Bad packet at %ld
Send
Recv
!Other end died
!Dropping to one-way xfer
+Refusing %s
!Unknown packet type %d
!Session aborted
#Sending %s
!Can't decode file length
*Finished partial file %s
*Saving partial file %s
*Remote can't handle file requests
You now have BinkleyTerm in DUMB TERMINAL mode.\r\n
In DUMB TERMINAL mode the following special keys are enabled:\r\n\r\n
Alt-B Cycle baud rate Alt-C Change communications parameters\r\n
Alt-D Dial a system Alt-E Erase the current screen\r\n
Alt-H Hang up by dropping DTR Alt-I Initialize the modem\r\n
Alt-J Jump to Command Shell Alt-L Start/stop logging to a file\r\n
Alt-M Manual poll Alt-P Cycle communications port\r\n
Alt-R Redial from a 'scan list' Alt-S Send BREAK signal to port\r\n
Alt-U Go to UNATTENDED MAILER mode Alt-V Show BinkleyTerm version\r\n
Alt-X Exit BinkleyTerm Alt-Y Call boss node for mail\r\n
PgUp Send a file (UPLOAD) PgDn Receive a file (DOWNLOAD)\r\n
Alt-F%-2d Macro string '%s'\r\n
\r\nPress a key to continue...
You now have BinkleyTerm in UNATTENDED MAILER mode.\r\n
In UNATTENDED MAILER mode the following special keys are enabled:\r\n\r\n
C Make the next call (if any) immediately\r\n
Alt-C Clear data from the \"Today at a Glance\" window.\r\n
Alt-I Initialize the modem\r\n
Alt-J/ESC Push to Command Shell\r\n
Alt-M Manually POLL a node\r\n
Alt-Q Quit the current event\r\n
Alt-R Re-start mail events as though none have previously executed\r\n
Alt-T Shift into DUMB TERMINAL mode.\r\n
Alt-W Redraw screen.\r\n
Alt-X Exit from BinkleyTerm with ERRORLEVEL 1\r\n
Alt-Y Call boss node for mail\r\n
cursorkeys PGUP/DN, UP/DN ARROW, HOME, and END scroll the 'Pending' window\r\n
F1..F10 Exit BinkleyTerm with errorlevel (10*n) (F1=10,etc)\r\n
Alt-B Blank the screen immediately\r\n
Alt-E Execute '%s' as message editor\r\n
Alt-F%-2d Execute '%s'\r\n
;
; The following 3-line message is system dependent.
; For OS/2 the message should look like:
;
;Couldn't initialize COM port. Check config.sys for COM0?.SYS\n
;or make sure the network is started if you are using a modem\n
;on another computer.\n
;
; Following is the DOS version of the message:
;
I'm sorry, there doesn't appear to be a FOSSIL driver loaded.\r\n
BinkleyTerm requires a FOSSIL driver. Please take care of this before\r\n
attempting to run BinkleyTerm again.\r\n
!Could not create temp flagfile %s
Created flagfile %s
Other node sending to %s
!Erroneous attempt to clear flag for %s
Deleted flagfile %s
!Unable to delete flag file %s
!Exceeded file request byte limit
Nodelist index refresh necessary
Couldn't set SIGINT
Modem protocol negotation filtered
Event %d starts in %d minutes
Flags for next event: %s